Відео

how do I turn up the tuner with a midi controller?

What is that, about two grand worth of pedals ?

So for banks where I did this the "old-fashioned" way will I need to go and and reprogram the toggle reset group?

Is it possible to bypass the page up and down when pressing on foot switches A+B and B+C ?

This is amazing! Thanks for continually upgrading the usability of your devices and making great videos to educate us! If I have a switch set to toggle between 2 presets will this mean it always resets to toggle state 1 when another switch is engaged? I've been trying to figure out how to do this for ages

Exact my my case of problems.

hello what is the difference between “toggle reset group”and “clear all preset toggle on”？

WOW, that's great!!! have you a dealer in Mexico or do you ship to here?

I somehow must have missed this Firmware update but I´ll d´load it asap! On the other hand: I´m using the MC6 mkII for over a year live and on rehearsal, working almost flawlessly 🤩

When already good things get better and better 🤩

I purchased my MC6 Pro two weeks ago and it took me several days of trial and error to figure out case two, how to enable one channel at a time on a three-channel amplifier using a single click. I had to clear all toggles and set toggle. I then discovered case one when enabling pedals and switching patches, but I had not yet figured out a solution. Well, here it is.

This is why I boxed up my MC6 Pro and it's just been sitting under my bed. Will now get it back out and on my board. Thanks ME!

Oh shit

Fantastic! I don't remember how I would to get around this but I think I was sending messages or instructions out to the controller itself to reset other switches when triggering another. This is MUCH BETTER!!

Toggle Preset is gold! Thanks for this

So how are you still able to toggle between pos 1 and 2 after you have turned off toggle mode? What's the point of turning it on in the first place?... Never mind. I think I got it now. By using a separate toggle message.

There was a way to do the reset group thing already. It was more complicated and you had to use check boxes for when this or that is on then this or that will go off... so it is much easier than before. Especially with snapshots on hx stomp.

This is awesome!

this is it....fixed so much of my problem

Loving the recent videos! Excited for more!

are the toggle groups set per bank, or do they work across banks?

Why do you use those specific cc numbers for those particular commands? Why can you get away with eg using cc number 13 for multiple different commands, yet eg when it comes to selecting scenes 1-4 a different cc number is used for each one?

Got the MC6 pro in the mail a couple days ago. I use it to control Reaper. It can do everything I need and more! Fantastic device!

Very helpful, although it skips over some details that would be helpful such as midi mapping and I'm not sure where to go to get that info.

This is great! Loving my MC6 PRO and ML10X… ❤

Finally 🎉

When will we get those additional wet dry wet and dirt videos! I absolutely love what I am seeing and I hope this is for me.

Any info on if/when we'll have a loop bypass option using the ML10X? This flexi switching option would be great for activating/deactivating overdrives on the fly

Thank you guys for sending me this video! This is a huge help. I am still finding that I can’t do what I want my device to do-I need the scroll feature but I need each step to control multiple functions at once-not just 1 midi message at a time… Is there any way to cycle through 3+ toggles and each step not be limited to a single midi message?

Any info on when we'll be able to have cc loop bypass using advanced mode? I run series and wet/dry depending on songs/artists im working with?

Can the MC6 control more than 3 devices with 1 expression pedal? Also, how does the cabling work?

can i use this with bigsby gamechanger pedal?

I also think your demos are perfect! Such great and clear work. Keep it up!

What if we want to cycle between 3 or more messages from a single switch? Toggling with single taps, similar to snapshots on the XS Stomp??

You added all those aux possibilities- but how do you access and use Presets A-X. Do they switch with every bank.

Thanks guys! Was just trying to figure this out last night. Lol

I have to say, Morningstar tutorial videos are some of the best videos I've watched. 😁

So toggle mode is for toggling between pos. 1 and 2..... But i can also toggle between pos. 1 and 2 without toggle mode, for that, i have to "say" toggle with a "toggle preset message" wich is quite the same without affecting possible later programmed messages. Now i understand some things so much better. What about the order of the messages? How do i know where to place them?

Awesome video, don’t know if someone can help me here. if there is a forum for Morningstarr, let me know, but Ill post my question here. Im trying to make it to where my MC6 Pro syncs to my DAW in toggle mode. When i switch presets in Mainstage or Gig Performer, it doesn’t update the MC6 Pro toggle state to Midi sync, even with midi sync engaged in the DAW If i have Preset A, with a “Chorus” stomp off, and Preset “B” with a Chorus stomp on, it will not receive the midi messages, even when i map it to CC10 Value 1-10 (i tried them all) to all outputs, even the ports, i found, send globally to port 1, regardless if I disengaged them in my daw.

the midi sequencer update is for all of you product ? because i am interested in only in sequencer ? which product should buy for my helix lt ? Thx for all.

In one video, I learned what I needed to know. Thank you for keeping it simple.

3:54... thank you.. this is all i really need.

How am I supposed to handle the silence when changing between presets? I need a couple of things ON too quickly and I can’t press many buttons. So, this is a problem

YOU GUYS ARE THE BEST

why you dont sell it in Thomann ?

You're a genious!

Will this work with a Strymon multi switch?

Man this series of midi videos is just what I was looking for. As someone just getting into midi and looping, I’m glad I found this brand

Just had my first session with programming the Omniport Relay Switching Interface...and with a DOD Rubberneck🤦‍♂ (it uses a weird 3-button switch). Trying to sort out what does what was like pulling teeth, due to the 3-button scenario. But the Relay Switch and the editor prevailed. I have: tap tempo, delay Mod ON/OFF, runaway Regeneration ON/OFF and the "Rubberneck Effect" under MIDI control. **NOTE to anyone else trying to set up the Rubberneck Delay with an MC MIDI controller, DO NOT try and use the Rubberneck effect and the runaway Regeneration at the same time....or just don't use any of the other functions while either of those effects are engaged. The controls for the Regen and Rubberneck will get swapped in the pedal....it's a headache.

Hi Morninstar, I really need your assistance. I have the Morningstar mc6 MKII and GT1000 core. What cable I have to use to connect them? Thank you so much in advance! Appreciate that